- Компьютеры и серверы
- Комплектующие
- Периферия
- Сетевое и телекоммуникационное оборудование
- Расходные материалы
- Офисное оборудование
- Системы видеонаблюдения
- Прочее
Плата Inspur SAS/SATA expander EXP-ENF5280HD (6G, 24ch ext, PCIEx4, FHFL)
Expander Card
Installation Steps
1) Each SAS backplane configuration two short lines, used to connect the motherboard and backplane interface accordingly. Correspondence relationship:
Backplane 1 "SAS_0" interface corresponds Expander Card "J1" interface;
Backplane 1 "SAS_1" interface corresponds Expander Card "J2" interface;
Backplane 2 "SAS_0" interface corresponds Expander Card "J3" interface;
Backplane 2 "SAS_1" interface corresponds Expander Card "J4" interface;
Backplane 3 "SAS_0" interface corresponds Expander Card "J5" interface;
Backplane 3 "SAS_1" interface corresponds Expander Card "J6" interface;
2) Upon completion of the backplane with SAS Expander Card cable connection, and then connect extrapolation RAID card, SAS cards and SAS Expander Card long cable. (Note: In addition to the Expander identification card J1 ~ J6 of the interface, the interface is the seventh extrapolation Expander board and card connector.)
3) The 4Pin power connector is connected to Expander card power connector.
ПОХОЖИЕ ТОВАРЫ
Контроллер RAID Adaptec ASR-8405E (PCI-E v3, MD2, LP) SGL SAS 12G, RAID 0,1,10, 4port(intSFF8643), 512Mb onboard, 2293901-R
Контроллер RAID Adaptec ASR-6805 PCI-E x8, 8-port SAS / SATA 6Gb / s RAID 0 / 1 / 1E / 10 / 5 / 5EE / 6 / 50 / 60, Cache 512Mb
Контроллер RAID Adaptec ASR-6405 SGL RAID 0/1/1E/10/5/5EE/6/50/60/JBOD 4i-ports 512Mb (2270000-R)
